The ADC Gage Valve is designed for use in 0 to 6000 psi fluid systems. Removal of the soft seat cap allows periodic calibration of the line gage and sampling of the fluid media without shutting down the pressurized system. With the elimination of swaging on the bonnet it provides an absolute, foolproof arrangement where it is impossible to undo the stem during operation.
FEATURES
Meets the latest military specification: MIL-V-24578 and proposed future revisions.
Operating pressure to 6000 psig. Proof pressure to 9000 psig.
Maximum handle torque of 50 inch pounds @ 6000 psig.
A union bonnet is utilized for a more positive attachemnt in case of overtorquing or abuse. No extra parts such as lockwire, pins, yokes etc. are needed. The stem is easily removable and may be replaced.
The cap assembly is retained by a stainless steel cable for permanent attachment and to prevent loss.
Wetted parts of the valve can be supplied in monel as well as standard stainless steel.
Connecting tail pices utilize O-Ring face seals.
For attachment to panels a rugged self-locking nut is supplied.
Sealing is obtained with a metal seat and zero leakage at all pressures.
Gage snubbers can be connected directly to vlavle port without adaptors.
U.S. Patent 4,519,580.
Shock tested per MIL-S-901 and vibration tested to MIL-STD-167.
