Search By Part Number	CATALOG MAIN PAGE -- CONDUIT SYSTEMS -- Standard Convolution, Standard Wall Conduits. Extra Flexible Convolution, Standard Wall Conduits. Extra Flexible Convolution, Thin Wall Conduits. Extra Flexible Convolution, Standard Wall Conduits With ...  - Phosphor Bronze or Stainless Steel Wire Overbraid  - Tinned Copper Wire Braid and Overbraid of Nomex or Dacron  - Tinned Copper and Phosphor Bronze Wire Braid, with Elastomer Outer Sheath -- CONDUIT ADAPTORS AND TRANSITIONS -- Male and Clamp Adaptor Assembly Female Adaptor Assembly Connector Adaptor Assembly Female Adaptors Elbows Connector Adaptors Elbows Bulkhead Adaptors Transitions Fittings for special applications -- TECHNICAL INFORMATION -- Material Properties of Sunflex Conduits and Elastomer Jackets Conduit Part Number Breakdown MIL-T-81914/X-XXXX Conduit Fittings Electromagentic Compatibility (EMC) Conduit Size Calculator Sunflex conduit part numbering breakdown       The following description of the Sunflex part numbering sequence is intended as a reference guide, so the user can understand the generic part numbering sequence and confirm that the correct selection of conduit has been made.       In situations whre only the basic convoluted conduit is required, the last six digits would be replaced by -000000.       Example: F11600a-000000 is the part number for a 1/2" internal diameter standard convoluted conduit, color-natural/clear       Please consult factory for special applications. MATERIAL   OUTER JACKET (insulation)   T = PTFE E = ETFE     00 = No outer jacket   F = FEP P = PFA     01 = Hypalon sheath (black)         02 = Neoprene sheath (black) FORM     03 = EPDM sheath (black)   1 = Standard conv./stnd. wall     10 = Dacron braid (black)   2 = Extraflex conv./stnd. wall     11 = Nomex braid (olive drab)   3 = Multiflex conv./stnd. wall     20 = FEP sheath (black)   4 = Standard conv./thin wall     21 = ETFE sheath (black)   5 = Extraflex conv./thin wall     22 = PFA sheath (black)   6 = Multiflex conv./thin wall             METAL BRAIDS (up to three possible) SIZE (internal diameter in 1/32"s)     0 = No metal braid   06 = 3/16 24 = 3/4     A = Tinned copper wire   09 = 9/32 28 = 7/8     B = Nickeled copper wire   10 = 5/16 32 = 1     C = Silvered copper wire   12 = 3/8 40 = 1-1/4     D = Phosphor bronze wire   14 = 7/16 48 = 1-1/2     E = Stainless steel (full cover)   16 = 1/2 56 = 1-3/4     F = Stainless steel (50% cover)   20 = 5/8 64 = 2             METAL FOIL LAMINATE HELIX (Reinforcing)     0 = No foil laminate   0 = No internal helix     1 = Aluminum foil laminate   4 = SST Helix (ETFE liner only)             CONDUIT TYPE (relationship to fitting) COLOR (Basic Conduit only)     A = For use with 'A' type fittings   0 = No pigmentation     B = For use with 'B' type fittings   1 = Black     ETC …