|
Series |
Series Description |
03
 |
Band Adapter Products provide an economical (fully 360°) approach to terminating overall, and / or, individual cable shielding, especially where future maintenance or reparability are required.
|
06
 |
Shrink Boot Adapter Products are configured to accommodate heat-activated, or cold, shrink boots / shapes. These adapters can be provided with pre-terminated braided shielding.
|
09
 |
Strain Relief Adapter Products provide a mechanical cable bundle clamping for light, medium, and heavy duty applications. 90° Designs are also offered for most available connectors.
|
12
 |
Adapter Extender Products allow for a greater amount of working area, behind the connector, while allowing the use of the provided strain relief.
|
15
 |
Non Environmental Adapter Products are designed with provisions for strain relief, and straight, 45°, and 90° options.
|
18
 |
Environmental Adapter Products are designed for cable sealing or moisture resistance, with a selection of available strain relief clamps, and provisions for straight, 45°, and 90° options. Note: Cable Sealing = Fluid Immersion; Moisture Resistant = Splash-Proof and Dust Resisting
|
21
 |
EMI/RFI Adapter Products provide individual and/or overall shield termination for optimal continuity. Products are offered with choice of strain relief, and provisions for straight, 45°, and 90° options.
|
24
 |
EMI/RFI Environmental Products offer the combination of options available in Product Series 18, and 21. The end result is a shield terminating, envi-ronment resisting design, with strain relief, and orientation options.
|
33
 |
EMI/RFI Spring Adapter Products offer termination and grounding for cables utilizing metal foil and/or shield braid, for overall cable shielding. The cable circumference is completely grounded to the adapter via the peripheral spring component provided.
|
36
 |
Shorting Can Adapter Products provide an enclosed protective area, behind the connector, for the assembly of test connectors and shorting plug assemblies.
|
39
 |
Pipe thread Adapter Products are designed to fit most National Pipe Thread (NPT) standardized parts (i.e. Hose Fittings, Conduit).
|
51
 |
Lamp Base Adapter Products are designed to provide cable bundle shield termination, via 360° compression form and opposing threaded compression nut. To complete the assembly, the use of a heat-activated, or cold, shrink boot is suggested, for jacketed, bulk cable.
|
57
 |
Commercial Conduit Product Adapters allow for field installable termination of Sealtite® (Liquidtite® ) conduit, typically associated with most Industrial applications.
|
90
 |
Accessory Hardware Products allow for the completed assembly of, or repair of, various interconnect system situations.
|
99
 |
Assembly Tool Products are designed to support the need of today’s Interconnect Product lines. All JSC tools provide cost effective, consistent, high reliability performance, needed for today’s Military / Aerospace environment.
|
