BUILD A BACKSHELL!!!
Use our utility to create a specific part number
for you interconnect application needs
CLICK HERE TO VIEW A LARGER IMAGE
Table III
| Connector Designator Shell Size | |||||
| A1, F3, L1,X1 | F4 | E Maximum Dimension | F Maximum Dimension | G Maximum Dimension | H Maximum Dimension |
| 8 | 9 | 0.546 (13.9) | 0.674 (17.1) | 0.661 (16.8) | 0.874 (22.2) |
| 10 | 11 | 0.609 (15.5) | 0.702 (17.8) | 0.765 (19.4) | 0.930 (23.6) |
| 12 | 13 | 0.632 (16.1) | 0.725 (18.4) | 0.820 (20.8) | 0.986 (25.0) |
| 14 | 15 | 0.657 (16.7) | 0.750 (19.1) | 0.880 (22.4) | 1.052 (26.7) |
| 16 | 17 | 0.682 (17.3) | 0.775 (19.7) | 0.942 (23.9) | 1.110 (28.2) |
| 18 | 19 | 0.701 (17.8) | 0.794 (20.2) | 0.986 (25.0) | 1.171 (29.7) |
| 20 | 21 | 0.727 (18.5) | 0.820 (20.8) | 1.049 (26.6) | 1.241 (31.5) |
| 22 | 23 | 0.752 (19.1) | 0.845 (21.5) | 1.111 (28.2) | 1.294 (32.9) |
| 24 | 25 | 0.778 (19.8) | 0.871 (22.1) | 1.174 (29.8) | 1.362 (34.6) |
*For connector family identification details click here.
Consult factory for availablitiy of other connector designators not shown above.
| |
|
.X ± .060 (1.5) .XX ± .030 (0.8) .XXX ± .015 (0.4) Angles: ± 5 degrees | |
