CLICK HERE TO VIEW A LARGER IMAGE
EXAMPLE BASIC PART NUMBER
click here for SERIES CODE INFORMATION
| ENTRY SIZE | C MAX DIA | D REF DIM | E REF DIM | F MAX DIA | G MAX DIM | H MAX DIA | J MAX DIM | K MAX DIA | CABLE ENTRY | |
| MAX | MIN | |||||||||
| 04 | .984 | .548 | 1.281 | .719 | .844 | .906 | 1.312 | 1.000 | .312 | .188 |
| 06 | 1.109 | .612 | 1.406 | .844 | .906 | 1.156 | 1.312 | 1.188 | .438 | .281 |
| 08 | 1.125 | .738 | 1.562 | 1.016 | .969 | 1.188 | 1.312 | 1.281 | .562 | .344 |
| 10 | 1.156 | .800 | 1.625 | 1.130 | .969 | 1.281 | 1.312 | 1.375 | .625 | .375 |
| 12 | 1.562 | 1.003 | 1.781 | 1.312 | .969 | 1.500 | 1.344 | 1.562 | .750 | .438 |
| 16 | 1.906 | 1.128 | 1.969 | 1.575 | 1.062 | 1.719 | 1.438 | 1.781 | .938 | .625 |
| 17 | 1.906 | 1.128 | 1.969 | 1.575 | 1.062 | 1.719 | 1.438 | 1.781 | .812 | .562 |
| 20 | 2.031 | 1.300 | 2.031 | 1.906 | 1.125 | 2.062 | 1.625 | 2.125 | 1.250 | .938 |
| 21 | 2.031 | 1.300 | 2.031 | 1.906 | 1.125 | 2.062 | 1.625 | 2.125 | 1.188 | .812 |
| 24 | 2.422 | 1.425 | 2.188 | 2.125 | 1.188 | 2.312 | 1.656 | 2.375 | 1.375 | 1.000 |
| 28 | 2.672 | 1.550 | 1.906 | 2.375 | 1.719 | 2.719 | 1.938 | 2.781 | 1.625 | 1.250 |
| 32 | 2.953 | 1.800 | 2.219 | 2.625 | 1.781 | 2.969 | 1.938 | 3.031 | 1.875 | 1.500 |
| SERIES CODE | G MAX DIM |
| A | 1.219 |
| B | 1.688 |
| C | 1.375 |
| D | 1.062 |
| E | 1.281 |
| F | 1.062 |
| FM | 1.062 |
| G | 1.281 |
| H | 1.625 |
| J | .875 |
| K | 1.094 |
| KA | .812 |
| KB | .875 |
| KC | .812 |
| KD | .812 |
| L | 1.094 |
| M | 1.094 |
| N | .938 |
| P | 1.750 |
| R | 1.312 |
| T | 1.188 |
| W | 1.562 |
| X | 1062 |
| U | 1.500 |
- NOTES:
- Identified Per MIL-STD-130
- Plating Index for Finishes Available
- Material; Adapter Components; Aluminum Alloy Per QQ-A-225 or QQ-A-591. Elastomers, Standard Neoprene Per MIL-R-3065 or Silicone (See Note 5) Per ZZ-R-765.
- Insert letter
'A' for MS3057 'A' Clamp.
'F' for MS3057 'D' Clamp.
'C' for 'C' nut. (no strain relief.) - Insert letter 'S' for silicone Elastomers. (Omit for Standard Neoprene).
- Insert letter 'E' for environmental assembly
- Insert letter 'R' for RFI assembly
- Adapter supplied with clocking feature to polarize elbow
- Insert the letter 'R' after series code designator to obtain spin coupling. Available on Series Codes C,F,FM,G & U only. (limited seal on F)
- See SE96 for entry styles not shown (Consult Factory for Availability).
Tolerance, unless otherwise specified:
.X ± .03 (1.5)
.XX ± .010 (0.8)
.XXX ± .005 (0.4)
Angles: ± 5 degrees
Fractions ± 1/32
Click here for this part's assembly procedure (AP9)
